|
|
|
Hamilton 30" x 40" 5 Color Press
|
Hamilton press 30” X 40”
Purchased 1981
Serial # 683662
Butler splicer – 50” diameter rolls
Fife web guide
5 wet offset print units 30” repeat, 40” wide web
3 print units with ink agitators
Air loaded Turn bars after print unit #1
Infeed in print unit #1
Punch unit with two punch shafts. One shaft with 5/32” diameter. Punches at .5 centers, 24” repeat. One shaft with 3/16” diameter punches at .666 centers, 24” repeat
Punch unit has ironing wheels
Linear perf unit. One shaft for perf. One for ironing.
Mechanical marker in the same unit as the linear perfs. Capable of marking at both 12” and 18” repeats.
Cross perf and ironing unit with heaters. Perf and ironer slots at 3” increments
Overlap slitting unit, air loaded web merge bars, 12” and 18” repeat sheeter with sheeter swing gears for both
12” Hamilton batcher delivery – Variable 12”-18”
18” Hamilton batcher delivery – Variable 12” – 18”
2 – 50HP Eddy Current drive motors
Overall length of press including Splicer – 71 feet
Overall width of press – 9 feet including motors and electrical panel
Press width – 6 feet
3 – 6” air loaded roll shafts
Press consists of 6 pieces
6 – 30” wide press side catwalks
All print units have complete ink rollers
Spare ink and dampening rollers
Plate bender
Blanket cylinders made for conventional blankets but stick on blankets were used.
Blanket size – 31” X 40”X .0355 thick
Blanket backer size – 32-1/2” X 40” X .032 thick
Plate size – 32.047” X 40” .012 thick
Typical Run speed @ 450 FPM with cross perfs. and sheeting.
Capable of running 1200 FPM if a Rewinder was added.
Optional:
WTI 50” diameter – 40” wide Rewinder.
Manufactured Date – 01/2000;
Serial Number – A00004.
Model Number – JR 50 / 40 /1500.
|
|
|
